Metal 3D Printing
Industrial-grade metal parts via DMLS and Binder Jetting. Complex geometries, high-performance alloys, and rapid turnaround.
Free shipping on all US orders. No minimum quantities.
What is Metal 3D Printing?
Metal 3D printing is an additive manufacturing process that builds metal parts by fusing metal powder particles layer by layer. It combines the strength and durability of traditional metals with the design freedom of additive manufacturing, enabling geometries that are impossible to machine or cast.
Unlike CNC machining which removes material from a solid block, metal 3D printing adds material only where needed. This allows for lattice structures, internal channels, topology-optimized designs, and consolidated assemblies that reduce weight while maintaining structural integrity.
Metal 3D printed parts are fully functional with excellent mechanical properties, making them suitable for end-use applications in aerospace, medical, automotive, and industrial sectors.
Advantages of Metal 3D Printing
Why engineers choose additive manufacturing for metal parts.
Complex Geometries
Create lattice structures, internal channels, and topology-optimized designs impossible with traditional machining.
Isotropic Strength
Metal 3D printed parts have uniform, multi-directional mechanical properties throughout the part.
Part Consolidation
Combine multiple assembly components into a single part, reducing weight and eliminating failure points.
Rapid Turnaround
Go from CAD to metal parts in days rather than weeks. No tooling setup or long lead times.
Design Freedom
Organic shapes, undercuts, and features that would require complex multi-axis machining.
Material Efficiency
Additive process uses only the material needed, reducing waste compared to subtractive machining.
Metal 3D Printing Processes
Two technologies optimized for different applications and requirements.
Direct Metal Laser Sintering (DMLS)
High-powered laser selectively fuses metal powder layer by layer to create fully dense parts with excellent mechanical properties.
Key Benefits:
- Fully dense parts (99.5%+)
- Superior mechanical properties
- Wide material selection
- High-precision tolerances
Materials:
Aluminum AlSi10Mg • Stainless Steel 17-4 PH • Stainless Steel 316L • Titanium Ti6Al4V • Inconel 625/718 • Tool Steel
Best for: High-performance functional parts, aerospace components, medical implants
Get DMLS QuoteMetal Binder Jetting
Binding agent is selectively deposited onto metal powder, then sintered or bronze-infiltrated to create cost-effective metal parts.
Key Benefits:
- Cost-effective at volume
- Fast turnaround times
- No support structures needed
- Complex geometries
Materials:
420 Stainless Steel (Bronze Infiltrated) • 316L Stainless Steel • 17-4 PH Stainless Steel
Best for: Functional prototypes, decorative parts, tooling, cost-sensitive production
Get Binder Jet QuoteDMLS vs. Binder Jetting Comparison
| Feature | DMLS | Binder Jetting |
|---|---|---|
| Part Density | 99.5%+ (fully dense) | ~95-97% |
| Surface Finish | Ra 6-15 µm (as-built) | Ra 3-6 µm (as-built) |
| Typical Tolerance | ±0.1mm + 0.1% | ±0.3mm + 0.3% |
| Support Structures | Required | Not required |
| Post-Processing | Support removal, heat treatment | Sintering or infiltration |
| Best For | High-performance, precision | Cost-effective, complex shapes |
| Relative Cost | Higher | Lower |
| Lead Time | 5-10 business days | 3-7 business days |
Direct Metal Laser Sintering Materials
Aluminum AlSi10Mg
Lightweight, good thermal conductivity, corrosion resistant
Aerospace brackets, heat exchangers, automotive components
Stainless Steel 17-4 PH
High strength, good corrosion resistance, heat treatable
Aerospace, medical devices, industrial equipment
Stainless Steel 316L
Excellent corrosion resistance, biocompatible, weldable
Medical implants, marine applications, chemical processing
Titanium Ti6Al4V
High strength-to-weight ratio, biocompatible, corrosion resistant
Aerospace structures, medical implants, racing components
Inconel 625
Extreme heat resistance, oxidation resistant, high strength
Turbine components, exhaust systems, chemical processing
Inconel 718
High-temperature strength, excellent fatigue life, weldable
Jet engine components, gas turbines, rocket motors
Metal Binder Jetting Materials
420 Stainless Steel (Bronze Infiltrated)
Good strength, excellent detail resolution, polishable
Decorative parts, tooling, functional prototypes
316L Stainless Steel
Corrosion resistant, biocompatible, good mechanical properties
Medical devices, jewelry, consumer products
17-4 PH Stainless Steel
High strength, good corrosion resistance, heat treatable
Industrial components, aerospace, automotive
Ready to Start Your Metal 3D Printing Project?
Upload your CAD files for instant pricing on metal prototypes and production parts.
Get Your Instant QuoteMetal 3D Printing Applications
End-use metal parts across demanding industries.
Aerospace & Defense
Lightweight brackets, turbine components, structural parts with optimized geometries.
Medical & Dental
Patient-specific implants, surgical instruments, dental restorations in biocompatible metals.
Tooling & Manufacturing
Conformal cooling channels, jigs, fixtures, dies, and cutting inserts with complex curvatures.
Automotive & Motorsport
Heat exchangers, exhaust components, suspension parts, and performance brackets.
Why Choose Artemis 3D for Metal 3D Printing?
Endless Options
Choose from DMLS and Binder Jetting processes with multiple metals, finishes, and post-processing options.
Easy to Use
Get metal parts delivered to your door without the hassle of sourcing, project management, or logistics.
Certified Quality
ISO 9001:2015, ISO 13485, and AS9100D certified partners for consistent, high-quality metal parts.
Start Your Metal 3D Printing Project
Upload your CAD files and get instant pricing for aluminum, steel, titanium, and superalloy parts in days, not weeks.